Tiếng Việt
TEAC TN-4D-SE – Slim direct-drive, SAEC, SUMIKO Oyster
TEAC TN-4D-SE is a manual direct-drive turntable: brushless DC motor with crystal-locked speed control to eliminate cogging, die-cast aluminum platter, SAEC knife-edge S-shaped tonearm, factory SUMIKO Oyster (MM) cartridge, and built-in phono EQ (NJM8080 op-amp, PHONO/LINE). Two speeds: 33⅓ / 45 RPM – a slim design rare in the direct-drive turntable segment.
Want belt-drive + Bluetooth aptX? See TEAC TN-400BT-X. Need USB vinyl ripping? See AT-LP120XUSB.
At a glance
| Spec | Details |
|---|---|
| Type | Direct-drive, manual |
| Speeds | 33⅓ RPM, 45 RPM (CNC aluminum knobs) |
| Motor | Brushless DC, crystal-locked |
| Platter | Die-cast aluminum |
| Cartridge | SUMIKO Oyster (MM, pre-installed) |
| Tonearm | S-shaped, SAEC knife-edge bearing; universal headshell |
| Phono EQ | Built-in NJM8080 – PHONO / LINE |
| Chassis | High-density MDF; black piano or walnut veneer |
| Feet | Aluminum + rubber isolation |
| Warranty | 12 months at District M |
Why choose TN-4D-SE?
- Cogging-free direct-drive: new-generation motor keeps the platter smooth while the chassis stays slim.
- SAEC knife-edge arm: stable tracking, clear imaging, strong detail retrieval.
- SUMIKO Oyster: warm, musical MM cartridge – ready to play out of the box.
- Built-in phono EQ: plug into active speakers directly or bypass for a separate phono stage.
- Compact footprint: slimmer than many traditional direct-drive decks.
New-generation direct-drive motor
TN-4D-SE uses a brushless DC motor with crystal-locked circuitry for accurate speed. The design removes cogging (stepwise rotor vibration): smoother platter rotation and a cleaner noise floor than many entry direct-drive tables.
Two finishes: multi-layer black piano or walnut veneer. Aluminum feet with rubber pads reduce acoustic feedback.
SAEC arm and SUMIKO Oyster
The S-shaped arm uses knife-edge bearings developed with SAEC: stable tracking across the record surface and precise response to small groove movements. Universal headshell supports cartridges from 14-23 g total mass.
Factory SUMIKO Oyster (MM) delivers a full, warm tone suited to many genres. Upgrade the stylus or cartridge using our cartridge buying guide.
Built-in phono EQ
The phono stage uses NJM8080 op-amps for a clean, low-distortion signal. The PHONO/LINE switch: enable EQ for active speakers or line-input amps; disable for MM phono inputs or an external preamp.
TN-4D-SE vs AT-LP120XUSB and TN-400BT-X
| Criteria | TEAC TN-4D-SE | AT-LP120XUSB | TN-400BT-X |
|---|---|---|---|
| Drive | Direct-drive, manual | Direct-drive, manual | Belt-drive, manual |
| Speeds | 33 / 45 RPM | 33 / 45 / 78 RPM | 33 / 45 / 78 RPM |
| Cartridge | SUMIKO Oyster | AT-VM95E | AT95E |
| USB / BT | None | USB rip | aptX Adaptive |
| Highlights | SAEC, slim chassis, no cogging | Pitch, 78 RPM | Walnut veneer, phono EQ |
| Best for | Compact hi-fi DD, Oyster cartridge | Vinyl ripping, light DJ use | BT + 78 RPM belt-drive |
Technical specifications
| Drive | Direct-drive, brushless DC motor |
| Speed control | Crystal-locked feedback |
| Platter | Die-cast aluminum |
| Tonearm | S-shaped, SAEC knife-edge bearing |
| Cartridge | SUMIKO Oyster MM |
| Phono EQ | NJM8080; switchable PHONO / LINE |
| Output | Gold-plated RCA + GND |
| Speeds | 33⅓ RPM, 45 RPM |
| Chassis | MDF; black piano or walnut veneer |
In the box
- SUMIKO Oyster pre-mounted on headshell
- Platter, slipmat, dust cover
- RCA cable + ground wire
- Power adapter (per official bundle)
FAQ: TEAC TN-4D-SE
Does TN-4D-SE have Bluetooth?
No. Analog playback only via RCA (PHONO or LINE). For Bluetooth, see TN-400BT-X.
What is cogging?
Slight stepwise vibration as the motor rotor is pulled and pushed by the stator magnets. TN-4D-SE reduces cogging with its new brushless motor design.
Do I need a separate phono preamp?
Not required when the built-in phono EQ is on and you connect to active speakers. Turn it off if you use a higher-end external phono stage.
Does TN-4D-SE auto-lower the tonearm?
No. Fully manual operation. For fully automatic playback, see AT-LP70XBT.
Can I replace the SUMIKO Oyster cartridge?
Yes. Universal headshell accepts compatible MM cartridges from 14-23 g (with shell); set tracking force correctly after swapping.
Where to buy authentic TN-4D-SE?
District M is an authorized TEAC retailer with 12-month warranty. Contact District M to choose black or walnut finish.
Spec source: TEAC TN-4D-SE.
Conclusion
TEAC TN-4D-SE balances stable direct-drive performance, a slim chassis, and hi-fi sound: cogging-free motor, SAEC arm, SUMIKO Oyster cartridge, and a practical built-in phono EQ. A strong fit for vinyl listeners who want accurate DD without a bulky footprint – not the right pick if you need USB ripping, 78 RPM, or Bluetooth.
District M can compare TN-400BT-X, AT-LP120XUSB, or match active speakers to your room.
TEAC TN-4D-SE at District M
Direct-drive SAEC arm, SUMIKO Oyster – PHONO/LINE setup and speaker pairing advice.
